المجلة الدولية للعلوم والتقنية

International Science and Technology Journal

ISSN: 2519-9854 (Online)

ISSN: 2519-9846 (Print)

DOI: www.doi.org/10.62341/ISTJ

مجلة علمية محكّمة تهتم بنشر البحوث والدراسات في مجال العلوم التطبيقية، تصدر دورياً تحت إشراف نخبة من الأساتذة

دراسة تأثير طاقة الطرق على صلادة المعادن (الحديد – النحاس – الألومونيوم) https://doi.org/10.62341/WBKH3553

الملخص
في هذه الورقة تم إجراء التحليل الكيميائي و كذلك الفحص المجهري و اختبار الصلادة لعينات مأخوذة من ثلاثة أنواع من المعادن هي الحديد و النحاس و الألومونيوم، قبل و بعد تعريضها لعملية حدادة بالطرق المفتوحة و الذي اتضح فيه أن المعادن تتأثر بالطرق تأثيراً بالغاً حيث تبين أن عينات المعادن التي تعرضت لعملية الطرق قد قلت فيها المتانة و زادت بها الصلابة زيادة طردية مع طاقة الناتجة الطرق. كما تبين من الفحص المجهري للتركيب البلوري للعينات لم يحدث به انهيار أو تشققات.
Abstract
In this paper, some mechanical properties of the forged metal are investigated. the chemical analysis , the microscopic examination and the hardness testing were carried out. The samples were taken from the three types of metals( iron, copper, aluminum). The Impact forging ( open die forging ) process was carried out on the three types of the metals. The hardness testing were carried out before and after process. It is noted that the metals are affected by the impact forging process. It was found that the metals specimens which were subjected to the forging process may decrease in toughness, while the hardness increased in proportional increasing with the energy of the impact forging process. The microstructure examination shows that the samples remained intact after the forging process and whiteout happening the wear or cracks.