المجلة الدولية للعلوم والتقنية

International Science and Technology Journal

ISSN: 2519-9854 (Online)

ISSN: 2519-9846 (Print)

DOI: www.doi.org/10.62341/ISTJ

مجلة علمية محكّمة تهتم بنشر البحوث والدراسات في مجال العلوم التطبيقية، تصدر دورياً تحت إشراف نخبة من الأساتذة

Relationships Between Microstructure and Pitting Corrosion For ADI in Chloride media

الملخص
حديد الزهر المستمبر له تركيبة مجهرية معقدة تحتوي على عدة أطوار تسمى أوسفرايت . مقاومة التآكل لحديد الزهر المستمبر ترتبط بالتركيبة المجهرية وتتحدد بعوامل المعالجة الحرارية (زمن الأستنة ,درجة حرارة الأستنة, زمن الأيزوتمبر, درجة حرارة الأيزوتمبر) . في هذا العمل , السلوك الكهروكيميائي ومقاومة التآكل لحديد الزهر المستمبر تم التحقق منهم بواسطة الطرق الكيميائية والغير كيميائية في الوسط الملحي. وقد تبين أن تأثير زمن الأستنة عند درجة حرارة 850 م0 لأزمنة مختلفة ومستمبرد عند درجة 360م 0 لثلاثة ساعات تحتوي في العموم على تركيبة مجهرية أوسفرايتيه. يتراوح مدى الأوستنايت المتبقي ما بين 20- 40%. قيمة الصلادة تزداد بزيادة زمن الأستنة . أظهرت الإختبارات الكهروكيميائية واللاكهروكيميائية في المحلول الملحي تآكل عام بينما أظهرت عينة واحدة تآكل نقري في الإختبار الكهروكيميائي.
Abstract
Austempered ductile iron (ADI) has complex microstructure containing a multiphase matrix called "austferite". The corrosion resistance of ADI is related to its microstructure which is determined by heat treatment parameters (austempering temperature, austempering time, austenitizing temperature and austenitizingtime). In this work, the electrochemical behavior and corrosion resistance of ADI have been investigated by electrochemical and non-electrochemical tests in chloride media. Particular attention has been paid to the influence of austenitization time (30,60,120,180,360 and 390) on the microstructure and their influence on ADI corrosion behavior. It has been shown that ADI austenitization at 850⁰C for different times and austempered at 3600C for three hours has generally ausferritic microstructure. Retained austenite ranges between 20% to 40%. Hardness increasesd with increasing austenitization time. Electrochemical and non-electrochemical testing in chloride solution showed general corrosion and pitting corrosion was observed in one sample in the electrochemical test.